Cable Cerviflam Marine XTCuZ1-K (AS) 0,6/1kV

$~\ImgCli\FOTO2_1370.jpg$

Screened flexible power and control cable for fixed installations in ships and offshore units. In locations where a good electromagnetic protection is necessary, as well as some additional mechanical protection is required.

Construction

1. Conductor

Flexible bare copper wires
Class V Acc. to UNE-EN 60228

2. Insulation

HF XLPE-90°C (IEC 60092-360)
Identification: See attached table

3. Composition

Insulated conductors laid up together

4. Inner covering

*For single core cables and, in case of multicore cables from 25mm2 (included):
Halogen-free compound
Colour: Natural

5. Armour

Tinned copper wire braid over aluminium/polyester tape

6. Outer sheath

Halogen-free compound SHF1 (IEC 60092-360)
Colour: Black

Technical characteristics

1. Operating voltage

600/1000V

2. Operating Tª (conductor)

Operation: -15°C +90°C
(Up to -40°C in fixed and protected installation)
During installation: 0°C
Short-circuit: 250°C (5s Max.)

3. Min. bending radius

6xD

Standards / Properties

1. Ref. standard for drawing

IEC 60092-353

2. Flame Retardant

IEC 60332-1-2

3. Fire Retardant

IEC 60332-3-22(Category A)

4. Halogen free

IEC 60754-1

5. Low corrosivity

IEC 60754-2
(pH >= 4,3 ; conductivity =< 10µS/mm)

6. Low smoke emission

IEC 61034 (Transmittance >60%)

7. UV resistant

EN 50618

Cable Cerviflam Marine XTCuZ1 K AS 061kV

Screened flexible power and control cable for fixed installations in ships and offshore units. In locations where a good electromagnetic protection is necessary, as well as some additional mechanical protection is required.